Electro voice EVID Series Speaker

Product Details:

The EVID FM4.2 flush-mounted loudspeaker system from Electro-Voice is a complete two-way in-wall loudspeaker package. The package consists of a bezel assembly, grille, rear enclosure, 4 inch two-way loudspeaker coupled with a 4 inch passive radiator
and an internal line-matching transformer. The loudspeaker features 4 inch low-frequency cone and high-temperature voice-coil assembly along with a 4 inch long excursion passive radiator and titanium coated dome tweeter. The EVID FM4.2 loudspeaker utilizes a crossover network, centered at 3,600 Hz,
that provides 16-dB-per-octave tweeter protection outside of its operating range. In addition the EVID FM4.2 features a comprehensive protection circuit to shield the woofer and tweeter drivers from excessive power levels. The EVID FM4.2 utilizes a transformer that offers a selection of 1.75, 3.75, 7.5, 15 or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines. The wattage is selected via a convenient switch
on the front baffle. The unit can also be operated as an 8-ohm speaker via the same front panel selector switch. The perforated grille is finished in semi-glass white powder-coated enamel. The baffle and bezel is constructed from heat resistant ABS. The rear
enclosure is constructed from zinc-plated, steel. The rear enclosure provides an optimum internal volume, ensuring extended low-frequency performance. It is constructed from heavy-gauge, rugged steel. The steel rear enclosure was optimized using FEA to virtually eliminate panel resonance. The entire enclosure is less than 4 inch deep providing an easy installation into nearly any tight wall or ceiling space. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker and provides pass through to additional speakers. FM4.2 loudspeakers provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range
reproduction of music or voice.

Features:

• 4 inch two-way system with polypropylene diaphragm for reliable long-term operation
• Extremely compact depth fits into tight spaces including walls and tight ceiling spaces
• Titanium coated tweeter gives even uniform high frequency coverage
• Front baffle wattage tap adjustment allows for easy level matching after installation
• Integrated low loss matching transformer allows for either 70v/100v or 8 ohm operation

 

Architectural and engineering specifications:
The EVID FM4.2 loudspeaker system shall be comprised of a baffle/bezel assembly, front grille, rear enclosure, tr

 

Architectural and engineering specifications:

ansformer, 4 inch passive radiator, and 4 inch loudspeaker. The loudspeaker will feature a 4 inch low-frequency cone and a high-temperature voice-coil assembly, coupled with a 4-inch passive radiator.
A 1 inch wide dispersion titanium coated dome tweeter extends the response to 20 kHz. Frequency response, uniform from 85 Hz to 18 kHz. Pressure sensitivity, 87 dB SPL at 1 meter (85 dB at 4 feet) on axis with one watt of band-limited pink noise from 500
Hz to 3 kHz (ref. 20μPa). Minimum impedance, 8.2 ohms. The loudspeaker shall be 349.9 mm (13.77 in) by 188.3 mm (7.42 in) and 96.5 mm (3.80 in) deep. Weight shall be 2.9 kg (6.5 lb) each. The flush- mounted loudspeaker package shall be the Electro-
Voice model FM4.2.

Product Details:

Features:-

• Shallow profile, ideal for tight wall or ceiling spaces
• Tuned passive radiator extends bass, enhances performance
• High quality 1-inch titanium dome tweeter
• Full-bandwidth overload protection
• 70 V, 100 V, and 8 ohms operation in the same model for off-the-shelf versatility
• Front-panel mode/wattage selector
• Fully-sealed enclosure provides superior isolation to protect adjacent rooms
• Secure Phoenix-style pass-through connectors for easy wiring and installation.
• Four point “quick mounting” tabs for fast attachment in any wall cavity
• Can-mounted transformer for enhanced rigidity
• Ribbed back can eliminates flexing